NEWS & EVENTS
HOT PRODUCT
- 600/500V Airport Ligting Cable
1. Voltage: 600/5000 Voltage; 2. Conductor: Copper; 3.Shield: Cross-linked Polyethlene(XLPE)-5kv; 4Insulated: Cross-linked Polyethlen... - MV Aerial bundle cable
1.Voltage:10kv 33kv,2.support conductor:galvanized steel wire messenger
NEWS & EVENTS
- 0.6/1kv Cu 3-4 Core LSF (Flame Fire) PVC/PVC Power Cable
- 120 Volts Single Phase service entrance cable 2x8awg Aluminum SEU Cable price
- Fire proof cable F-FR-8 cable 0.6/1KV Rated voltage cable XLPE insulation FR-PVC sheath Power Cable
- PVC insulation single 25mm2 electric welding cable
- solid copper conductor 2.5mm Flat wire PVC insulated Flexible electric flat cable
- NYY-J PVC 0.6/1kV Power Cable
CONTACT US
- Tel: +86-371-6676-6667
- E-mail: sales@hlcables.com
- Fax:+86-371-8751-3085
- Msn: WhatsApp:8615093102503
News & Events
600V AA8000 Aluminum Conductor XLPE insulation PVC Sheath SEU Concentric Cable 90 Degree 2x4awg Price
Information Source:Huadong Cable Group-Zhengzhou Hongliang Cable Co., Ltd24 fiber Release date:07/11/2018
1. Appliction
These requiremnets cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a sunmersibe pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has thermose insulation, except for HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type USE cable has thermoset or thermoplatic insulation.
2. Specification
Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.
3. Construction
Type SE cable is constructed with sunlight resistant Type XHHW-2 conductor or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, available as 1 conductor with a concetric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material.
4. Type
Single core type round with full neutral entrance cable
Single core type round with less neutral entrance cable
Single core type round with full neutral and communication cores entrance cable
Two core type Flat with full neutral entrance cable
Two core type round with full neutral entrance cable
Three core type round with full neutral and communication cores entrance cable
Three core type round with less neutral entrance cable
Previous | LV Aluminum PVC insulation service drop cable 6 awg duple... Next | ASTM aluminum aerial cables XLPE insulated Triplex Servic...